16 MASTERCONSOLE II USER MANUAL
Assigning Names and Scan Rates
When you specify non-computer devices (MasterConsole units) connected to base
MasterConsole II channels, these devices are automatically assigned default names in the base
MasterConsole II Selection Menu. In addition, since computers can be connected to each
channel of a second-tier MasterConsole, a page is automatically created for each second-tier
MasterConsole in the Selection Menu, listing Channel IDs with default names for each channel.
These names may be changed using the Edit Names and Scan Rate Menu.
The following are the MasterConsole II default Channel ID and Names for connected devices in a
two-tier configuration.
Figure 23 Default MasterConsole II Channel IDs and Names
To change Names and/or Channel-Specific Scan Rates:
1. Activate On-Screen User Interface.
2. Press <F3> to access the Edit Names and Scan Rate Menu.
Figure 24 Edit Names and Scan Rate Menu (Base MasterConole II)