128
Network
7
7 Network
If you want to set up the connection manually, select IP Settings. Then, go to the next
section, “How to set up manually”.
Manual Network Setup
Use the Manual Network Setup when connecting your product to a network that requires a Static IP
address or if the automatic connection process has failed.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps:
1Right click the Network icon on the bottom right of the screen.
2In the pop-up menu that appears, click Status.
3On the dialog that appears, click the Support tab.
4On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps:
1Go to the Network Settings screen.
2Select Wireless (General), press [ ], and then press [ ] again.
3The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
4In the list of networks, press the or button to select a network, and then press the [ ] button
twice.
If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the
correct Network Name (SSID) and Security key to establish the connection.
5If the Enter security key screen appears, go to step 6. If you selected an wireless router that does not
have security, go to step 8.
6Enter the Security key (Security key or PIN).
When you enter the Security key (Security key or PIN), use the /// buttons on your
remote to select number/characters. Press [ ] to enter the characters.
You can also enter numbers by pressing the number buttons on your remote.
You should be able to find the Pass Phrase on one of the set up screens you used to set up
your router or modem.
7When done, use the bu tton to move the cursor to Next, and then press the [ ] button.
8The network connection screen appears and the verification process starts. Press [ ] to cancel.
Select IP Settings on the network connection screen. The IP Settings screen appears.
9Select the field on the top, press [ ], and then set IP Mode to Manual.
10 Press the button on your remote to go to the IP Address entry field, and then press [ ].