198
Appendix
Appendix
Powering Off, Screen Saver and Power Saving Mode
Power off the product for 2 hours after using it for 12 hours.
Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
Regular Color Change
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Avoid combinations of a text color and background color of contrasting brightness.
Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).
Regular Text Color Change
Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
Move and change text every 30 minutes as shown below.
Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
FLIGHT FLIGHTTIME TIMEOZ348UA102 21:1020:30OZ348UA102 21:1020:30
Type 1 Type 2
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348
:
:
FLIGHT TIME
OZ348 20:30
:
:
[ Step 1 ] [ Step 2 ] [ Step 3 ]
20:30