151
System
8
8 System
8.13 DivX® Video On Demand
MENU System DivX® Video On Demand ENTER
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
8.14 Network Remote Control
MENU System Network Remote Control ENTER
Turn on/off or give permission to Samsung mobile phone devices to connect with and control the
product.
You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more
details, refer to each device’s manual.
The message “Connecting to
Anynet+ device...” appears on
the screen.
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
The connected device is not
displayed.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Some HDMI cables may
not support Anynet+ functions.
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
Problem Possible Solution
O
m
O
m