159
MagicInfo Lite
10
10 MagicInfo Lite
10.2 Network Schedule
10.2.1 Connecting to a server
To use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web).
To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must be
set using the remote control.
Network setup
To run MagicInfo Lite, connect to a network.
Refer to 123 page for details about the Network Settings menu.
Server setup
Go to MENU Network MagicInfo Lite Settings Server. Next, enter the server information.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
Configuring the FTP mode and default storage space
Default Storage: Specify the location you want to save content (downloaded from the server) to.
Internal Memory: Save the content to the internal memory of the product.
USB memory: Save the content to USB memory.
If a network schedule is running when USB memory is not connected, the default content will run.
MagicInfo Lite
Server
Server Address
Port
Access Periodically
192.168.0.10
7001
Apply Cancel