SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
1.Press the Dial Knob.
To display the time in the...2.Turn the Dial Knob to set time display type. (24H or 12H). At that time, press the Dial Knob to select the type of time.
3. Turn the Dial Knob to set the hour. At that time, press the Dial Knob to set the hour.
4.Turn the Dial Knob to set the minute.
5.Press the Dial Knob to complete the setup.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended. First, place the food in the centre of the turntable. Then, close the door.
1. Press the Microwave button.
Result: The 800 W (maximum cooking power) indications are displayed:
2. Turn Dial Knob to desired until the appropriate power level is displayed. At that time, press the Dial Knob to set the power level.
3. Set the cooking time by turning the Dial Knob. Result: The cooking time is displayed.
4.Press the START/+30s button.
Result: The oven light comes on and the turntable starts
rotating.
1) Cooking starts and when it has finished the oven beeps 4 times.
2)The end reminder signal will beep 3 times (once every minute).
3)The current time is displayed again.
Never switch the microwave oven on when it is empty.
If you wish to heat a dish for a short period of time at maximum power (800 W), simply press the START/+30s button once for each 30 seconds of cooking time. The oven starts immediately.
USE OVEN 04
English - 15