Alignment and Adjustments
Outdoor Unit(cont.)
Display | EXPLANATION(The error indicated on the PCB display of outdoor unit) | REMARK |
|
|
|
|
| check pipe length, indoor |
| Outdoor unit freezing(Compressor stop) | unit filter, refrigerant leakage/ |
|
| charge and service port |
|
|
|
| Outdoor unit overload - Safety control(Compressor stop) | check pipe length, refrigerant |
| leakage/charge | |
|
| |
|
|
|
| Outdoor unit high discharge temperature - Safety control | check pipe length, refrigerant |
| (Compressor stop) | leakage/charge |
|
|
|
| Outdoor unit EEV open (Stopped indoor unit s) |
|
|
|
|
| Outdoor unit EEV open (operating indoor unit s) |
|
|
|
|
| High temperature(over 30˚C) of outdoor as heating mode |
|
|
|
|
| Low temperature(under |
|
|
|
|
| Outdoor Fan Error |
|
|
|
|
| Communication cable mismatched between indoor and outdoor unit | Check electrical connection |
|
|
|
| Inverter compressor starting failure (5 times) |
|
|
|
|
| Compressor trip by input current control mode (PFC over current) |
|
|
|
|
| Compressor trip by OLP temperature control mode |
|
|
|
|
| DC peak error (IPM Over Current) |
|
|
|
|
| Compressor Limit Error |
|
|
|
|
| DC link Voltage error (under 150V, over 410V) |
|
|
|
|
| Abnormal compressor running |
|
| (Compressor Rotation Error) |
|
|
|
|
| Current sensor error |
|
|
|
|
| DC link Voltage sensor error |
|
|
|
|
| OTP Error |
|
|
|
|
| Inverter micom |
|
NO GAS error(self diagnosis)
Piping(gas leak)
Samsung Electronics |