Troubleshooting_ 51
8. Insert the toner cartridge back into the machine.
9. Close the fuser unit cover.
10.Close the top cover and open the output tray. Printing automatically
resumes.
Solving other problems
The following chart lists some trouble conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, contact a service representative.
Other problems include:
•See "Power problems" on page 51.
•See "Paper feeding problems" on page 52.
•See "Printing problems" on page 52.
•See "Printing quality problems" on page 54.
•See "Common Windows problems" on page 56.
•See "Common Linux problems" on page 56.
•See "Common Macintosh problems" on page 57.

Power problems

Click this link to open an animation about solving power problems.
Condition Suggested solutions
The machine is
not receiving
power,
or the connection
cable between the
computer and the
machine is not
connected
properly.
•Plug in the power cord and press (power)
on the control panel.
•Disconnect the machine cable and reconnect
it.