Samsung MM A880 manual Using Call Name or #, Calling Contacts Entries, Calling Nicknames, 144

Using Call <Name or #>

You can voice dial from your phone with a single command by saying “Call” followed by a name or nickname and (optionally) a label stored in your contact list, or “Call” followed by a valid phone number. You can also say “Call” by itself and be prompted for the name or number.

Calling Contacts Entries

To place a call using Call <Name or #>:

1.Press and hold .

2.Say “Call” followed by the name and the label for that number. For example, say “Call John Mobile.” The phone dials the number stored for the contact “John” with the label “Mobile.”

If the location recognized for the name does not have a number stored in contacts, VoiceSignal will play the message “No number available, John Smith, Mobile,” and then launch the Contacts application for that name.

If a name has only a single number, or if you know the name but are not sure which number to call, say “Call” followed by the name only. For example, say “Call John.” If the name is recognized and there is only one number for the name, VoiceSignal immediately places the call. If there are multiple numbers stored for the contact, the phone prompts you with “Which Number?” and displays a list of options. You can select an option by saying it or by using your keypad.

Calling Nicknames

Your Contact List incorporates a field called “Nickname.” When you add a nickname to a contact, you can say the contact's name or nickname when using the voice features.

144 Section 2I: Using Your Phone’s Voice Services