2Using "PCoIP"
Image
The Image page allows you to make changes to the image quality of the PCoIP session. This applies to sessions between PCoIP zero clients and PCoIP host cards in a remote workstation.
To configure the image quality settings for a VMware View virtual desktop, adjust the PCoIP session variables. Refer to the "VMware View 4 to PCoIP Client WAN Network Guidelines" for more details.
The Image parameters can also be configured using the Administrative Web Interface.
Figure 2-21: Image
zImage Quality Preference
Use the slider to adjust the balance between image sharpness and smooth motion during a PCoIP session when network bandwidth is limited.
This field is also accessible on the host if the PCoIP Host Software is installed. The slider can be found under the Image tab of the host software. This setting does not work in PCoIP sessions with VMware View virtual desktops running release 5.0 or earlier.
2 Using "PCoIP" 56
