2Using "PCoIP"
2.2Connection to Use "PCoIP"
zDo not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
2.2.1 LAN Connection
LAN
1Connect the LAN cable to [LAN] on the back of the product.
z
z
It is not supported when the network speed is below or equal to 10Mbps. Use Cat7(*STP Type) cable for the connection.
*STP: Shielded Twist Pair
2.2.2 Connecting USB Devices
z
z
The [ 
] port supports up to USB 2.0.
VMware View 4.6 or later is required. Data transfer rate may decrease depending on the network conditions.
1Connect a USB device, such as a keyboard or mouse, to [ 
] at the back of the product.
2 Using "PCoIP" 29
