Q7 A DVD or an MPEG file is only played on the LCD (ATI chipset model)

AWhen both the LCD and the CRT are being used simultaneously, video plays on one of them by default.

1.Right-click over the Desktop and select Properties.

2.In the [Display Properties] window, click the Settings tab > Advanced > ATI Overlay tab.

3.Select the Theater Mode option, and then configure the Overlay Display Mode to 'Theater Mode' or 'All The Same’ and then click on Apply. Then you can view the video on both the LCD and CRT screens.

Q8 Pressing the <Fn>+<F2/> keys while booting displays a red line on the screen. (For ATI chipset models)

APressing the <Fn>+<F2/> keys in the Setup screen or while booting the system may display a red line on the screen. This is a problem that occurs while drawing an icon on the screen and does not affect the operation of the system.

Q9 When I change the power source to the battery by removing the AC adapter or change the display device to CRT from LCD, I sometimes see a POWERPLAY warning message (ATI chipset models)

AThe PowerPlay function is a new technology that extends the battery usage time. PowerPlay works only when the system is operating on battery power and using an LCD. When the PowerPlay function is disabled due to a changed operating environment, the PowerPlay function warning message may be displayed.

Q10 I cannot see the Taskbar on the Desktop when I use a projector (ATI chipset models)

AThis happens when the projector does not support the screen resolutions of 1400 x 1050 pixels or 1680 x 1050 pixels which are supported by the 15.4" WSXGA+ LCD monitor. In this case, change the system screen resolution to 1024 x 768 pixels (recommended).

Troubleshooting 127