• To create a computer-to-computer (Ad Hoc) network:

To create a new computer-to-computer (Ad Hoc) or to connect to a hidden access point (Stealth/Closed Mode), refer to the following procedures.

A hidden access point is an access point that exists, but is configured not to be detected by the scan operation to prevent access attempts from unauthorized users.

1.In the Profile Management window, click on Create.2.Enter a profile name in the Profile Name field.3.Enter a network name to be connected with SSID1.

What is a Network Name?

Network name is a name that a wireless adapter uses for identifying connection. Enter the name of computer-to-computer network to create (e.g., samsung) or the name of access point to connect. The network name identifies cases. (capital and lowercase) For the name of access point, check the settings of the access point, or ask your wireless network administrator.

4.In the Security window, select either that the WEP Key to be used for the computer-to-computer is to be created or Do Not Use.

To connect to an access point, select one of the Security Settings set for the access point.

5.Set the network type in the Advanced window.

Network Mode:

Ad Hoc – Select to connect to a computer-to-computer (Ad Hoc)

Infrastructure – Select to connect to an access point

6.When a new profile is created, the profile appears in the list of the Profile Management tab and the connection to the corresponding profile is started.

88 Users Manual