Samsung NP-X20T004/SES, NP-X20TV05/SES manual Installing the Atheros Client Utility Program

Wireless Network Setup Using the Wireless LAN Setup Program (for Atheros 802.11BG Card)

You can use a wireless network by using a wireless LAN configuration program (Atheros Client Utility) provided separately.

This description is for the Atheros 802.11BG card.

For Intel 802.11BG, Intel 802.11ABG cards, see page p82.

To use wireless network connection, complete the following procedures.

•Step 1. Install the Atheros Client Utility program.

•Step 2. Construct a wireless network.

To construct a small office wireless network (peer-to-peer) with two computers, you have to setup the two computers identically according to the following procedures.

Step 1. Installing the Atheros Client Utility Program

Install the Atheros Client Utility program included on the System Software CD-ROM onto the computers to be connected to the network.

Step 2. Using the Atheros Client Utility

Right-click the wireless LAN program ( ) icon of the Taskbar and select Open Atheros Client Utility.

(or select Start > All Programs > IEEE 802.11 WIRELESS LAN > Atheros Client Utility)

• To Connect to an Access Point

To connect to an access point or existing computer-to-computer (Ad Hoc) network, refer to the following procedures. (To create a new computer-to-computer network, refer to the following "To create computer-to-computer (Ad Hoc) network" section.)

1.In the Profile Management tab, click on Scan to search for available wireless networks.

2.Double-click or select the name of an access point (or a new computer-to- computer network) in the Network Name (SSID) field and click on Enable.

86 Users Manual