Power On
To remove your computer from the docking station with the power on, complete the following steps:
1.Press the undock computer button on front of the docking station for one second.
Undock Computer Button
- or -
1.Click Start > Undock Computer (
).
2.When the “Undock Complete” message balloon is displayed on the screen, click
to close the message balloon.
3.Pull the two release levers outward until they click, the computer will pop up approximately 1 cm.
4.Tilt the system up at the back.
5.After tilting, remove the system by sliding/lifting out toward the back of the docking station.
6.Connect the AC adapter to the system.
10 Users Manual