Samsung 5.Remove the installed module if necessary, 10.Reinstall the screw you removed in step, 11.Re-installthe computer battery and plug in the AC adapter

Memory Module Precautions:

When removing the module, pull on the plastic portion of the connector slots tabs only. Do not pull on the metal part of the tabs, this may damage the tabs.

5.Remove the installed module if necessary.

a.Pull the tabs on the connector slot outward slightly, until the edge of the memory module pops up.

b.Hold the memory module by the edges and pull it forward out of the compartment.

6.Align the connector on the memory module with the connector of the slot.

7.Push the memory module into the slot at a slight angle until the connectors are fully engaged.

45O

8.Push down on the edge of the memory module until the module snaps into place.

9.Align the memory module compartment door with the compartment and push the door down until it snaps into place.

10.Reinstall the screw you removed in step 2.11.Re-install the computer battery and plug in the AC adapter.

12.Turn on the computer and perform a complete POST to check the memory integrity.

Using Options 67