If you use a simple terminal program (i.e. hyper terminal):Type the “ATX3&W” or “ATX3” command as an initialization command.

MODEM Notes:

1. In order to use the 56K feature, be sure to check if the standards supported by the on-line service provider and the modem are identical.

2.If you use a PBX phone system, you can not connect using the 56K mode.

3.Internationally connected calls will be limited to 33.6K (Max.)

Using the LAN

Install the LAN cable by simply plugging the cable into the slot on the left side of the computer if undocked or the back of the docking station.

Inserting Lan Cable with System Docked

Inserting Lan Cable with System Undocked

Your computer’s LAN adapter is ready to use for most situations, however if your system does not have a DHCP server or you wish to personally configure your LAN connection, proceed as outlined in “Configuring Network Environment” below.

Network Protocols:

You may need to consult your SysAdmin if their network network protocols and settings are required for your LAN environment.

30 Users Manual