Samsung Removing the Battery, Installing the Battery, To remove the battery from the computer:, To install the battery pack, follow the steps below:

Removing the Battery

Your computer comes with the battery pack inserted in the computer.To remove the battery from the computer:1.Turn the computer’s power off and close the LCD display panel.2.Undock the computer if docked. See “Docking/Undocking your Computer” on page 8.3.Turn the computer over so that the bottom of the unit is facing up.4.Slide the locking battery latch to the unlock position.

Locking Battery Latch

Battery Latch

5.Slide and hold the remaining battery latch outward and slide the battery out of the compartment.

Installing the Battery

To install the battery pack, follow the steps below:

Insert the battery into the battery compartment. Ensure the correct orientation so that the battery fits in its slot properly.

1.With the computer’s power off, close the LCD panel and turn the computer over so the bottom of the unit faces up.

2.Slide the battery into the battery pack into the compartment. Ensure the battery is fully inserted into the compartment.

48 Users Manual