Samsung NS026NHXEA Selecting Heat Mode, Heat mode can be select only on the heat pump models

Selecting Heat Mode

The Heat mode can be select only on the heat pump models.

1Press (ON/OFF) button.

Result: The air-conditioner will turn on with the mode selected when the unit was last used.

Caution The air-conditioner has a built-in protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

The air-conditioner will start up after three minutes.

2To select Heat mode, press button until Heat appears on the remote control display.

Result: The air-conditioner will run in Heat mode.

3 To adjust the temperature, press button to set the desired temperature. The temperature can be set between

16°C(61°F) and 30°C(86°F).

Result: The temperature is adjusted by 1°C(1°F) when button is pressed.

4Press button to select the fan speed until the required setting is displayed.

Automatic(rotated :   )

Low

Medium

High

5To adjust the airflow direction refer to page 18~19.

ENGLISH

E-15