Samsung NV72M1010BS/EE, NV72M1010BS/EG manual Power connection, Accessories

Accessories

Power connection

The oven comes with different accessories that help you prepare different types of food.

Wire rack Wire rack insert * Baking tray *

L N

01 02 03

01BROWN or BLACK

02BLUE or WHITE

03YELLOW and GREEN

Plug the oven into an electrical socket. If a plug-type socket is not available due to allowable current limitations, use a multi- pole isolator switch (with at least 3 mm spacing in-between) in order to meet safety regulations. Use a power cord of sufficient length that supports the specification H05 RR-F or H05 VV-F, min. 1.5-2.5 mm².

Installation

Universal tray * Extra-deep tray *

NOTE

Availability of accessories with an asterisk (*) depends on the oven model.

Rated current(A)	Minimum cross-sectional area
10 < A ≤ 16	1.5 mm2
16 < A ≤ 25	2.5 mm2

Check the output specifications on the label attached to the oven.

Open the rear cover of the oven using a screwdriver, and remove the screws on the cord clamp. Then, connect the power lines to the relevant connection terminals. The ()-terminal is designed for earthgrounding. First connect the yellow

and green lines (earthgrounding), which must be longer than the others. If you use a plug-type socket, the plug must remain accessible after the oven is installed. Samsung is not responsible for accidents caused by missing or faulty earthgrounding.

WARNING

Do not step on or twist the wires during installation, and keep them away from heat-emitting parts of the oven.

English  7

NV72M1010BS_EE_DG68-00889A-01_SV+NO+FI+DA+EN.indb 7

2016-12-16 ￿￿ 8:03:16