131
Wireless network
The camera connects to a smart phone that supports the Remote
Viewnder feature via a WLAN. Use the smart phone as a remote shutter
release with the Remote Viewnder feature. The captured photo will
display on the smart phone.
•
The Remote Viewnder feature is supported by Galaxy series smart phones or
Galaxy Tab models with the Android 2.3 OS or higher or iOS devices with the
iOS 6.0 or higher. Before using this feature, check the device’s rmware and
update it if needed.
•
You should install Samsung SMART CAMERA App on your phone or device
before using this feature. You can download the application from Samsung
Apps, the Google Play Store, or the Apple App Store. Samsung SMART
CAMERA App is compatible with Samsung camera models manufactured in
2013 or later.
•
To install and launch Samsung SMART CAMERA App on an NFC-enabled
smart phone, turn on the NFC feature and place the smart phone near an NFC
tag (p. 30) on the camera. This feature is supported by smart phones running
Android OS 2.3 or higher. This feature is not available for iOS devices.
•
This function is not available in 3D mode.
1 On the camera, rotate the mode dial to B.
2 On the camera, select .
•
If the pop-up message that prompts you to download the
application appears, select Next.
3 On the smart phone, turn on Samsung SMART CAMERA App.
•
For iOS devices, turn on the Wi-Fi feature before turning on the
application.
•
To start the application automatically on an NFC-enabled smart
phone, turn on the function and place the smart phone near
the NFC tag (p. 30) on the camera. Verify that the smart phone is
connected to your camera, and then skip to step 6.
4 Select the camera from the list and connect the smart phone

to the camera.

•
The smart phone can connect to only one camera at a time.
Using a smart phone as a remote shutter release