![](/images/new-backgrounds/1274421/274421193x1.webp)
Information code | Possible cause | Solution | |
|
|
| |
C0 | Check the Auto Cook sensor. | Restart the appliance using the Power | |
|
| button. If the problem continues, | |
C1 | The temperature is sensed higher | ||
disconnect power for more than 30 | |||
| than specified. | ||
| seconds. Then, restart the appliance and | ||
|
| ||
C2 | Check the Auto Cook sensor. | ||
try again. If the problem still continues, | |||
|
| contact a local service center. | |
A2 | The DC Motor fails to operate | ||
| |||
| because of problems with the PCB |
| |
| or wiring, or electrical disturbance |
| |
| on the motor blade. |
| |
|
|
| |
d0 | The sensor is pressed for more | Check if the sensor pad is wet or pressed. | |
| than 8 seconds. | If the problem continues, restart the | |
|
| appliance using the Power button. If the | |
|
| problem still continues, contact a local | |
|
| service center. | |
|
|
| |
F0 | Communications between main | Restart the appliance using the Power | |
| and sub PCBs fail. | button. If the problem continues, | |
|
| disconnect power for more than 30 | |
F2 | The | ||
seconds. Then, restart the appliance. If | |||
| communicates abnormally. | ||
| the problem still continues, contact a local | ||
|
| ||
|
| service center. | |
|
|
|
Warranty and service
English 45