139

Setting a Supervisor Password

ASupervisorPasswordisrequiredtoturnthecomputer
onortostarttheSystemSetup.
WhensettingaSupervisorPassword,usersotherthana
supervisor cannot use the computer.
1 SelecttheSecuritymenuintheBIOSSetup.
2 In the Set Supervisor Password item, press
<Enter>.
3 Enter a password, press <Enter>,re-enterthe
passwordforconrmation,andpress<Enter> again.
Thepasswordcanbeupto8alphanumeric
characters.Specialcharactersarenotallowed.
4 Whenamessageconrmingthepassword
congurationappearsinthe[Setup Notice]window,
press <Enter>.
Thesupervisorpasswordhasbeenset.
The supervisor password is required to turn the
computeronortoentertheBIOSSetup.

Setting a Boot Password

Whensettingapassword,youhavetoenterapasswordtousethecomputerorentertheBIOSSetup.
Byconguringapassword,youcanrestrictsystemaccesstoauthorizedusersonlyandprotectdataandlessaved
on the computer.
Before You Start!
Donotloseorforgetyourpassword.
Ifyouhaveforgottenyourpassword,contactaSamsungservicecenter.Inthiscase,aservicefeewillbecharged.