Samsung PPM63M7FB manual Setting the PC

Setting the PC

➢ Set the PDP Display to the PC mode by pressing the SOURCE
		Setup
	button.	Screen Burn Protection		
1	Press the MENU button to display the menu.	Language	: English	
		Time	: Off	
2	Press the ▲ or ▼ button to select Setup, then press the	Game Mode		
		Blue Screen	: Off	
	ENTER button.	PC	: Off	
		Melody		
3	Press the ▲ or ▼ button to select PC, then press the
		Home Theatre PC	: Off	
4	ENTER button.	 More
	Select the desired option by pressing the ▲ or ▼ button,	Move	Enter	Return
	then press the ENTER button.
	Available options: Image Lock, Position, Auto Adjustment,
		PC
	Image Reset, Zoom
		Image Lock		
5	When you are satisfied with your setting, press the ENTER	Position		
		Auto Adjustment		
	button.
6		Image Reset		
	Press the EXIT button to exit.	Zoom		

Image Lock: Coarse/Fine

The purpose of picture quality adjustment is to remove or

reduce picture noise.	Move	Enter	Return
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune		Image Lock
again.				50
	Coarse
After the noise has been reduced, re-adjust the picture so that	Fine			13
it is aligned on the center of screen.

1Press the ▲ or ▼ button to select Coarse or Fine, then press the ENTER button.

2Press the ◄ or ► button to adjust the screen quality, vertical stripes may appear or the picture may be blurry.

Press the ENTER button.	Move		Enter	Return
 Position
Adjust the PC’s screen positioning if it does not fit the PDP			Position
Display screen.
1 Adjust the position by pressing the ▲/▼/◄/► button.
2 Press the ENTER button.
 Auto Adjustment
Auto adjustment allows the PDP display to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted	Move		Enter	Return
automatically.
 Image Reset
You can replace all image settings with the factory default	Auto Adjustment in Progress
values.		Please wait.
 Zoom: Zoom/Position/Reset
- Zoom: 0 - 1 - 2 - 3 - 4 - 5 - 6	Image Reset is completed.
Option 0 represents a normal screen.
The greater the number, the more magnified the
		Return
screen.
You can select the position and reset functions by

selecting options 1 through 6. (If you select option 0, the position and reset functions are not selected.)

If you have set the Zoom function between 1~6,

you will not be able to select the Auto Adjustment function.

-Position: You can adjust the position.

-Reset: The previously adjusted settings will be reset to the factory defaults.

English - 33