Connecting and Using the Home Theater System | Samsung PS-42V4S

Connecting and Using the Home Theater System

ENG

Use the Monitor Out ports of the PDP for Home Theater System Connections.

Rear of the TV

Connecting the Home Theater System

① Connect the monitoring audio out L, and R jacks of the MONITOR OUT on the rear-side connection panel of the PDP TV to the AUDIO IN jacks of the DVD Home Theater System (or AV Receiver) using the audio cable.

② Press the TV/VIDEO button to select the desired external device connected to the

PDP TV.

③ If you want to hear the sound through separate speakers, cancel the internal amplifier.

①	②
DVD Home Theater	AV Receiver Amplifier

☛◆ Refer to corresponding user’s manual from the manufacturer for wiring the speakers to the DVD Home Theater System (or AV Receiver).

◆Disable the PDP TV internal speaker to enjoy the rich sound through the speakers of your Home Theater System.

◆In this case, enjoy the sound from the Home Theater System while the PDP TV does not produce the audio.

To Display the DVD Home Theater

!Turn the PDP on and press the TV/VIDEO button to select the Ext.1 (or Ext.2).

@Be sure to connect the video cable properly if desired external input (Ext.1 or Ext.2) cannot be selected.

#Play the DVD after activating the DVD Home Theater System.

$Use the volume control of the Home Theater System while watching the PDP using the DVD Home Theater, where the PDP TV does not produce the audio.

54

Image 54

Samsung PS-42V4S manual Connecting and Using the Home Theater System, Connecting the Home Theater System

Contents

PDP-TELEVISION Screen Image retention Sold Separately Video Cable Contents Symbols Actual configuration on your PDP may be different Depending on your model Rear Panel For further details about connection, refer to pages 50~54 Infrared Remote Control Inserting the Batteries in the Remote Control Stand base will be sold separately depending on model Installing the Display on the Wall Attachment Panel Connecting External Devices to the PDP Connecting Speakers Ferrite Cores Using a Coaxial cable Connecting to an Aerial or Cable Television NetworkConnecting a Satellite Receiver or Decoder Rear of the PDP To switch your PDP off, press the I / button again Switching On and OffPlacing in Standby Mode Mains lead is attached to the rear of your PDP Change channels and adjust the volume Becoming Familiar with the Remote ControlRemote control is used mainly to Display the on-screen menu system Plug & Play Feature To start the search, press the Enter button If you want to reset this feature Choosing Your Language Storing Channels Automatically See Auto PAL Secam or Storing ChannelsManuallyYou wish to identify Auto NT3.58 NT4.43 PAL60 Channel mode Skipping Unwanted Channels Skipping unwanted channels Sorting the Stored Channels Assigning Names to Channels Activating the Child Lock Activating the child lock Displaying Information Changing the Picture StandardDynamic Standard Movie Custom High Middle Low Custom Result The Custom menu is displayed Adjusting the Picture SettingsCustom Options available in DVI Mode Contrast Brightness, Sharpness Adjusting the Picture Settings DVI Mode Press the Menu button to confirm your choice Using the Fine Tune Colour System and Sound System settings are correctIf reception is weak, you can fine tune a channel manually Viewing the Channel Scan Picture Freezing the Current Picture Positioning and Sizing the screen using Zoom Selecting the Picture Size Selecting the Film Mode DNIeTM Digital Natural Image engine Setting the Blue Screen Setting the Melody SoundMelody sounds when the television is powered on or off Table of PIP Settings Viewing the Picture In Picture PIPTV Ext.1 Ext.2 AV S-Video Component DVI Tvpip Using the Digital NR Digital Noise Reduction Feature Using the LNA Low Noise Amplifier FeatureResult The options available are listed Changing the Sound Standard Standard Music Movie Speech Custom Adjusting the Sound Settings Adjusting the Volume Automatically Setting the TruSurround XT Selecting the Internal MuteStereo Selecting the Sound Mode depending on the model Forced mono Setting the Sleep Timer Setting and Displaying the Current Time Switching the Television On and Off Automatically Absent Power Off Viewing an External Signal Source Ext.1 Ext.2 AV S-Video Component DVISatellite STB, AV Receiver, DVD Receiver, Game Redirecting an Input to the External Output Teletext Feature Contents Displaying the Teletext Information Press the TTX/MIX button again Selecting Display Options To display Press Selecting a Teletext Connecting to the External Devices Input/Output SpecificationRear of the TV Connecting to the S-Video Input Connecting to the DVI Input Connecting to the Component Input Connecting and Using the Home Theater System Connecting the Home Theater System Scart Connector Ext.1,Ext.2 DVI Input Connector 24Pin Check the volume Power buttonCheck the picture contrast and brightness settings Normal picture but no sound Check the volume Memo After Sales Service