Switching On and Off
The mains lead is attached to the rear of your PDP.
1Plug the mains lead into an appropriate socket.
Result: The Standby indicator on the front of the PDP lights up.
➢The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz.
2Press the “ I / 
” button on the front of the PDP (or POWER ( 
) button on the remote control) to switch the PDP on.
Result: The programme that you were watching last is re- selected automatically.
➣ If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 19 or “Storing Channels Manually” on page 20.
3To switch your PDP off, press the “ I / 
” button again.
ENG
Front of the PDP |
Placing in Standby Mode
Your PDP can be placed in Standby mode, in order to reduce the Power consumption.
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1Press the POWER ( 
) button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the PDP lights.
2To switch the PDP back on, simply press the POWER ( 
) button again or a numeric button.
➣ You can also switch on by pressing the P 
or 
button.
15 |
