Installing the Display on the Wall Attachment Panel

ENG

Installation Notes

Do not install the PDP on any place other than vertical walls.

To protect the performance of the PDP and prevent troubles, avoid the followings:

-Do not install next to smoke and fire detectors.

-Do not install in an area subjected to vibration or high voltage.

-Do not install near or around any heating apparatus.

Use only recommended parts and components.

Mounting Kits (Sold Separately)

Wall Mount Bracket

Plastic Hanger

Screws

 

4 EA

4 EA

How to Adjust Mounting Angle

(depending on your model)

The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket.

1Secure the PDP to the wall mount bracket. (Please refer to the following instructions.)

2Set the angle by pulling the upper end of the PDP attached to bracket in the direction of the arrow.

3The angle can be adjusted from 0° to 15° by ±2°.

10

Page 10
Image 10
Samsung PS-42V4S manual Installing the Display on the Wall Attachment Panel