Scart Connector Ext.1,Ext.2 | Samsung PS-42V4S manual

Pin Configurations

ENG

SCART Connector (Ext.1,Ext.2)

➢ Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are

	only wired on the Ext.1 connector.
Pin	Signal	Pin	Signal

1Audio output R

2Audio input R

3Audio output L

4Audio chassis return

5Video chassis return (RGB blue)

6Audio input L

7RGB blue input (EXT1)

8Switching voltage

9Video chassis return (RGB green)

10 AV-Link (EXT1)

11 RGB green input (EXT1)

12	-
13	Video chassis return (RGB red)
14	-

15RGB red (EXT1) or chroma input

16Blanking signal (RGB switching)

17Video chassis return

18Blanking signal ground

19Video output

20Video or Luminance input

21Screening/chassis return

DVI Input Connector (24Pin)

PinSignal

1T.M.D.S. Data2-

2T.M.D.S. Data2+

3T.M.D.S. Data2/4 Shield

4T.M.D.S. Data4-

5T.M.D.S. Data4+

6Clock (DDC)

7Data (DDC)

8Not Connected

9T.M.D.S. Data1-

10T.M.D.S. Data1+

11T.M.D.S. Data1/3 Shield

12T.M.D.S. Data3-

13T.M.D.S. Data3+

14+5V Power

155V Grounding

16Hot Plug Detect

17T.M.D.S. Data0-

18T.M.D.S. Data0+

19T.M.D.S. Data0/5 Shield

20T.M.D.S. Data5-

21T.M.D.S. Data5+

22T.M.D.S. Clock Shield

23T.M.D.S. Clock+

24T.M.D.S. Clock-

55

Image 55

Samsung PS-42V4S manual Scart Connector Ext.1,Ext.2, DVI Input Connector 24Pin

Contents

PDP-TELEVISION Screen Image retention Video Cable Sold Separately Contents Symbols Depending on your model Actual configuration on your PDP may be different For further details about connection, refer to pages 50~54 Rear Panel Infrared Remote Control Stand base will be sold separately depending on model Inserting the Batteries in the Remote Control Installing the Display on the Wall Attachment Panel Connecting External Devices to the PDP Connecting Speakers Ferrite Cores Rear of the PDP Connecting to an Aerial or Cable Television NetworkConnecting a Satellite Receiver or Decoder Using a Coaxial cable Mains lead is attached to the rear of your PDP Switching On and OffPlacing in Standby Mode To switch your PDP off, press the I / button again Display the on-screen menu system Becoming Familiar with the Remote ControlRemote control is used mainly to Change channels and adjust the volume To start the search, press the Enter button Plug & Play Feature Choosing Your Language If you want to reset this feature See Storing Channels Automatically Auto NT3.58 NT4.43 PAL60 Storing ChannelsManuallyYou wish to identify Auto PAL Secam or Channel mode Skipping unwanted channels Skipping Unwanted Channels Sorting the Stored Channels Assigning Names to Channels Activating the child lock Activating the Child Lock Changing the Picture Standard Displaying InformationDynamic Standard Movie Custom High Middle Low Custom Brightness, Sharpness Adjusting the Picture SettingsCustom Options available in DVI Mode Contrast Result The Custom menu is displayed Press the Menu button to confirm your choice Adjusting the Picture Settings DVI Mode Colour System and Sound System settings are correct Using the Fine TuneIf reception is weak, you can fine tune a channel manually Freezing the Current Picture Viewing the Channel Scan Picture Selecting the Picture Size Positioning and Sizing the screen using Zoom DNIeTM Digital Natural Image engine Selecting the Film Mode Setting the Melody Sound Setting the Blue ScreenMelody sounds when the television is powered on or off Viewing the Picture In Picture PIP Table of PIP SettingsTV Ext.1 Ext.2 AV S-Video Component DVI Tvpip Using the LNA Low Noise Amplifier Feature Using the Digital NR Digital Noise Reduction FeatureResult The options available are listed Standard Music Movie Speech Custom Changing the Sound Standard Adjusting the Volume Automatically Adjusting the Sound Settings Selecting the Internal Mute Setting the TruSurround XTStereo Forced mono Selecting the Sound Mode depending on the model Setting the Sleep Timer Setting and Displaying the Current Time Absent Power Off Switching the Television On and Off Automatically Ext.1 Ext.2 AV S-Video Component DVI Viewing an External Signal SourceSatellite STB, AV Receiver, DVD Receiver, Game Redirecting an Input to the External Output Contents Teletext Feature Press the TTX/MIX button again Displaying the Teletext Information To display Press Selecting Display Options Selecting a Teletext Input/Output Specification Connecting to the External DevicesRear of the TV Connecting to the S-Video Input Connecting to the DVI Input Connecting to the Component Input Connecting the Home Theater System Connecting and Using the Home Theater System DVI Input Connector 24Pin Scart Connector Ext.1,Ext.2 Normal picture but no sound Check the volume Power buttonCheck the picture contrast and brightness settings Check the volume Memo After Sales Service