Wireless LAN Specifications Optional | Samsung Q30 specification

Wireless LAN Specifications (Optional)

Intel(R) PRO/Wireless 2200BG Network Connection

	Item		Specifications

	Physical	Dimensions	59.75 X 44.45 mm (Width X Height)

	Specifications	operation temperature	Same as system operation specifications
		and humidity	Temperature: 0 ~ 70°C, Humidity: less than 85%

		Power Saving Mode	135mW
	Power	Receiving Mode	0.85W

	Specification	Transmission Mode	1.45W

		Power	3.3V

		Compatibility	IEEE 802.11g, IEEE 802.11b

		Operating System	Microsoft Windows XP
	Network		- NDIS5 Miniport Driver

	Specifications	Media Access Protocol	CSMA/CA (Collision Avoidance) with
			Acknowledgement (ACK)

		Security	Wired Equivalent Privacy support (WEP) 64bit/128bit
			WPA, CCX

*This piece of equipment supports the Wi-Fi wireless LAN security standard,

WPA (Wi-Fi Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network consisting of the WPA and CCX, 1.2.2.8 or higher version of wireless LAN driver have to be installed on your computer, and certificates or PROSet may be required depending on the network settings. For driver update, visit www.samsung.com and for information on the PROSet installation, refer to P.4-13 ”Wireless Network Setup Using the Wireless LAN Setup Program” . For more information, ask your network administrator.

■RF Specifications

R-F Frequency Band	2.4GHz

Support Channels	Channels allowed per country.

Device Description	Transceiver

Power	5 mW
Transmission Method	11b mode: DSSS
	11g mode: OFDM

Data Rate (Mbps)*	11b mode: 11, 5.5, 2, and 1
	11g mode** : 54, 48, 36, 24, 18, 12, 9, and 6

Antenna Type	Internal Antenna 2 EA (main/aux)

*The data rate may differ from the actual data rate.

**11g mode is supported only when the device is connected with an IEEE802.11g device (e.g. IEEE802.11g compatible Access Point).

Appendix A-3

Image 122

Samsung Q30 manual Wireless LAN Specifications Optional, IntelR PRO/Wireless 2200BG Network Connection, RF Specifications

Contents

Q30 plus Contents System Management Using The ComputerConnecting to the Internet Appendix Recovering the ComputerCustomizing your computer Page Chapter Introducing The Computer Front View Right View Left View Rear View Bottom View Turning Off Turning the Computer On and OffTurning On Select Turn Off Computer Registering a new user Click Start Log Off Click Switch UserCreating and Changing User Accounts Changing users Double-click Run Function TouchpadClick Select Function Touchpad Touchpad buttons Drag and drop a part to the required place Using the Touchpad Scroll FunctionDrag Move / Select This button is held down Name Using the KeyboardKey Function Application Key BinationsUp / Page Down, Direction Keys Windows key Status Indicators Icon Name Description Adjusting the brightness using the Battery Manager Adjusting LCD BrightnessTo adjust using keyboard There are 8 levels of LCD brightness 1Dimmest~8Brightest Press + or + from the keyboard Adjusting the VolumeUsing the Volume Control Program Proper Seating Posture During Computer Use Seating Posture Introducing Windows Tour of the elementary functions provided by Windows XP Windows XP BasicsWindows XP Tour Understanding the Desktop Understanding the Start Menu Click Start My Computer What is a Folder? What is a File?Understanding a Window To view the entire structure of the drive Help and Support Center Click Start Help and Support Creating a New Document Click Start All Programs Accessories WordPadDocument Operations Saving a Document Opening a Document Printing a Document Using The Computer To Run a CD Using the CD Drive optionalConnecting a CD drive Connect the CD drive to the Ieee 1394 port Using the Windows Media Player Help Windows Media Player Help To Play an Audio CD To Play a Video CD To Write Data in CD To Burn an Audio CD Enjoying Home Theater Connect 5.1 channel soeaker system to your computer Configure digital sound output on the computer Enable S/PDIF on the DVD program Insert the memory card into the memory card slot Using Memory Card SlotTo insert and use a memory card To protect the data in the memory card To remove a memory cardTo format a memory card Using the CF Card Slot Double-click the EasyBox icon on the desktop Using EasyBoxLearn about EasyBox Or select Start All Programs Samsung EasyBox EasyBox Click Start All Programs Samsung EasyBox EasyBox Using EasyBoxConfiguring Firewall To change background or skin Using Samsung Smart ScreenClick Start All Programs Samsung Samsung Smart Screen Using Samsung Theme Double-click the Samsung Theme icon on the desktop Using Samsung Update Plus To Update Samsung Software and Drivers Automatic update items display 18Manual Connecting to Internet Connecting to the Internet Option 4 Connecting using a wireless LAN Connecting to the Internet Using a Modem For more account information, please contact your ISP Connect the network LAN cable to the LAN port of the system Click Start Control Panel Install button Using Both Dhcp and Static IP Simultaneously This is also called a peer-to-peer network Access PointComputer-to-computer ad hoc Connecting to an Access Point AP Network Connection icon on Click Change the order of Preferred Networks Connecting to computer-to-computer networksSetting up a computer-to-computer network On the Wireless Networks tab, click Advanced Connecting to the Internet Connecting to the configured computer Using the wireless LAN configuration program PROSet Wireless Network Setup Using the Wireless LAN SetupProgramInstalling the wireless LAN configuration program PROSet To connect to an Access Point Done window appears, click OK Security SettingsAvailable Networks, click on Refresh To create a computer-to-computer Ad Hoc network Profiles, click on Add Using the program, you can do the following Using Samsung Network ManagerTo configure network setting You can easily find out your current IP To change network places You can change network places as below To configure the server To share an Internet connection To configure the client Click Click here to setup Internet Connection Share Sharing files or folders Using Network ServicesConfiguring Network Environment Settings Configuring Sharing Select ‘Just enable file sharing’, and click OK Using Shared Files or Folders Click Other Places Microsoft Windows Network Configuring Printer Sharing Sharing Printers Adding and Using a Shared Printer Connecting to the Internet Using a wireless keyboard and mouse Using Bluetooth Devices OptionalFollowing functions are provided by the Bluetooth software Using a wireless printer Bluetooth On-line help PrecautionsUsing a Personal Area Network Name for your computer on a personal area network 28Manual System Management Managing Power Specifying Power Save Time Using the Power button You can configure the function of the power button Using the Battery Ejecting and Attaching Battery To view on the battery Monitoring the Battery ChargeUsing the shortcut key to view To view through the Control Panel Decreasing the LCD Brightness Extending the battery use timeUsing the Battery Manager Turning Off Unnecessary DevicesTurning off Use Battery CalibrationWhen Running a Game or Multimedia Application Using the Security Lock Traveling with the Computer 10Manual Customizing your computer Using System Setup To enter System Setup Menu Items Description System Setup MenusSystem Setup Navigation Keys Configuring the Password Setting the Supervisor Password Deactivating the Password Setting the User PasswordActivating the Booting Password Changing Booting Priority Configuring Resolution and Color Depth When you have completed configuration, click Apply Using External Display Devices Right-click on the desktop, and select Graphics Properties Twin/IntelR Dual To switch display devices using shortcut keyTo change the screen resolution and color quality Display Clone Click Scan Virus, select drive to inspect, and click Scan Checking for VirusesSelect Start All Programs Norton AntiVirus Norton AntiVirus Recovering Computer When the computer is not operating properly Restoring the System Creating a Restore PointSelect ‘Create a restore point’, and than click Next Undoing the last restoration Returning your computer to an earlier restore pointProcedures to undo a restoration are described below Reinstalling Software Running the system software media Installing drivers and programs Re-Installing Windows When using a partitioned hard disk drive Recovering the Computer When Start Microsoft Windows appears, click the Next button If the System Software Media consists of 2 CDs Q2The system freezes during program operation Windows RelatedQ1The system does not shutdown properly Q1The LCD screen is blank Adjust the LCD screen brightness. Use the Fn + , Fn + keysDisplay Related Q6 I pressed Fn+ keys, then the screen blinks Q8 Fn+ keys do not operate Modem Related Q2 I cannot make a call using an extension lineThis case, complete the following procedures Q1 I cannot hear the modem sound Dialing Rules tab, click Edit Using an AT commandQ3 How do I use my modem when dialing from overseas? Wired LAN Related Q1 Wake On LAN Function Wireless LAN Related Q3 I cannot share an Internet connection Q4 I cannot connect to the AP Check the Computer SettingsCheck the AP Settings A6 Check the network key settings encryption key 18Manual Page 20Manual Q6 The running speed of a game is too slow or fast Change the setting of Power Schemes to Always OnGame/Program Related 22Manual Security Center 24Manual Page 26Manual Appendix System Specifications Specification Comment RF Specifications Wireless LAN Specifications OptionalIntelR PRO/Wireless 2200BG Network Connection Specifications IntelR PRO/Wireless LAN 2915ABG Network Connection Copyright Registered Trademarks Safety Instructions Instructions for Setup There is a danger of electric shocks Cases when the hard disk and data may be damagedInstructions for careful handling Use authorized service centers as the system may be damaged