Samsung Q30 manual Configuring the Password, Setting the Supervisor Password

Configuring the Password

■Setting the Supervisor Password

By configuring a supervisor password, you can restrict system access to autho- rized users only.

Note Do not lose or forget your password. If you have forgotten your password, contact the Samsung service center.

1.Select the Security menu in the System Setup. (To enter into System Setup, see Page 6-2.)

2.On the ‘Set Supervisor Password’ item, press <Enter>.

Supervisor Password	Clear
User Password	Clear	Supervisor Password
Set Supervisor Password	[Enter]	controls access to the
		setup utility.
Set User Password	[Enter]
Password on boot	[Disabled]
Fixed disk boot sector	[Normal]

3.Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter> again.

4.When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>.

6-4Manual