Turning Off Unnecessary DevicesTurning off | Samsung Q30 manual

Note Power Saving Effect

This shows the relative battery use time for each power mode. The more effective the power saving, the longer the graph will appear.

When Running a Game or Multimedia Application

A game or multimedia application may not work smoothly in Maximum Battery Saving Mode.Using this is recommended when the AC adapter is connected or in Normal or higher modes.

■Turning Off Unnecessary DevicesTurning off

Turning off unnecessary devices extends the battery use time.

Select the Start > Control Panel > Performance and Maintenance > System > Hardware tab and click Device Manager. Right-click a device you are not using, and select 'Disable' (e.g. Wireless LAN, IEEE 1394, etc.)

■Use Battery Calibration

If you charge/discharge the battery repeatedly for only a short time, the battery use time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be same by discharging the battery completely using the Battery Calibration function, and then recharging it again.

1.Turn off the computer and disconnect the AC power.

2.Turn on the computer and press <F2> to enter into System Setup.

3.Select Smart Battery Calibration in the Boot Menu, and press <Enter> to start.

The Battery Calibration function is activated and the battery is discharged forcibly. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge.

Boot Device Priority
NumLock	[Off]	Select system boot
Enable Keypad	[By NumLock]	options
Summary screen	[Disabled]
Boor-time Diagnostic Screen	[Disabled]
PXE OPROM	[Only with F12]
Brightness Mode Control	[Auto]
Wireless device control	[Always On]
Smart Battery Calibration

4.When the calibration process is complete and the battery is completely discharged, connect the AC power adaptor to fully recharge the battery.

Chapter 5. System Management 5-7

Image 80

Samsung Q30 manual Turning Off Unnecessary DevicesTurning off, Use Battery Calibration

Contents

Q30 plus Contents System Management Using The ComputerConnecting to the Internet Appendix Recovering the ComputerCustomizing your computer Page Chapter Introducing The Computer Front View Right View Left View Rear View Bottom View Turning the Computer On and Off Turning OnTurning Off Select Turn Off Computer Click Start Log Off Click Switch User Creating and Changing User AccountsRegistering a new user Changing users Touchpad Click Select FunctionDouble-click Run Function Touchpad Touchpad buttons Using the Touchpad Scroll Function Drag Move / SelectDrag and drop a part to the required place This button is held down Name Using the KeyboardKey Function Binations Up / Page Down, Direction KeysApplication Key Windows key Status Indicators Icon Name Description Adjusting LCD Brightness To adjust using keyboardAdjusting the brightness using the Battery Manager There are 8 levels of LCD brightness 1Dimmest~8Brightest Press + or + from the keyboard Adjusting the VolumeUsing the Volume Control Program Proper Seating Posture During Computer Use Seating Posture Introducing Windows Tour of the elementary functions provided by Windows XP Windows XP BasicsWindows XP Tour Understanding the Desktop Understanding the Start Menu What is a Folder? What is a File? Understanding a WindowClick Start My Computer To view the entire structure of the drive Help and Support Center Click Start Help and Support Click Start All Programs Accessories WordPad Document OperationsCreating a New Document Saving a Document Opening a Document Printing a Document Using The Computer Using the CD Drive optional Connecting a CD driveTo Run a CD Connect the CD drive to the Ieee 1394 port Using the Windows Media Player Help Windows Media Player Help To Play an Audio CD To Play a Video CD To Write Data in CD To Burn an Audio CD Enjoying Home Theater Connect 5.1 channel soeaker system to your computer Configure digital sound output on the computer Enable S/PDIF on the DVD program Insert the memory card into the memory card slot Using Memory Card SlotTo insert and use a memory card To protect the data in the memory card To remove a memory cardTo format a memory card Using the CF Card Slot Using EasyBox Learn about EasyBoxDouble-click the EasyBox icon on the desktop Or select Start All Programs Samsung EasyBox EasyBox Click Start All Programs Samsung EasyBox EasyBox Using EasyBoxConfiguring Firewall To change background or skin Using Samsung Smart ScreenClick Start All Programs Samsung Samsung Smart Screen Using Samsung Theme Double-click the Samsung Theme icon on the desktop Using Samsung Update Plus To Update Samsung Software and Drivers Automatic update items display 18Manual Connecting to Internet Connecting to the Internet Option 4 Connecting using a wireless LAN Connecting to the Internet Using a Modem For more account information, please contact your ISP Connect the network LAN cable to the LAN port of the system Click Start Control Panel Install button Using Both Dhcp and Static IP Simultaneously This is also called a peer-to-peer network Access PointComputer-to-computer ad hoc Connecting to an Access Point AP Network Connection icon on Click Change the order of Preferred Networks Connecting to computer-to-computer networksSetting up a computer-to-computer network On the Wireless Networks tab, click Advanced Connecting to the Internet Connecting to the configured computer Wireless Network Setup Using the Wireless LAN SetupProgram Installing the wireless LAN configuration program PROSetUsing the wireless LAN configuration program PROSet To connect to an Access Point Done window appears, click OK Security SettingsAvailable Networks, click on Refresh To create a computer-to-computer Ad Hoc network Profiles, click on Add Using Samsung Network Manager To configure network settingUsing the program, you can do the following You can easily find out your current IP To change network places You can change network places as below To configure the server To share an Internet connection To configure the client Click Click here to setup Internet Connection Share Sharing files or folders Using Network ServicesConfiguring Network Environment Settings Configuring Sharing Select ‘Just enable file sharing’, and click OK Using Shared Files or Folders Click Other Places Microsoft Windows Network Configuring Printer Sharing Sharing Printers Adding and Using a Shared Printer Connecting to the Internet Using Bluetooth Devices Optional Following functions are provided by the Bluetooth softwareUsing a wireless keyboard and mouse Using a wireless printer Precautions Using a Personal Area NetworkBluetooth On-line help Name for your computer on a personal area network 28Manual System Management Managing Power Specifying Power Save Time Using the Power button You can configure the function of the power button Using the Battery Ejecting and Attaching Battery Monitoring the Battery Charge Using the shortcut key to viewTo view on the battery To view through the Control Panel Decreasing the LCD Brightness Extending the battery use timeUsing the Battery Manager Turning Off Unnecessary DevicesTurning off Use Battery CalibrationWhen Running a Game or Multimedia Application Using the Security Lock Traveling with the Computer 10Manual Customizing your computer Using System Setup To enter System Setup Menu Items Description System Setup MenusSystem Setup Navigation Keys Configuring the Password Setting the Supervisor Password Deactivating the Password Setting the User PasswordActivating the Booting Password Changing Booting Priority Configuring Resolution and Color Depth When you have completed configuration, click Apply Using External Display Devices Right-click on the desktop, and select Graphics Properties To switch display devices using shortcut key To change the screen resolution and color qualityTwin/IntelR Dual Display Clone Click Scan Virus, select drive to inspect, and click Scan Checking for VirusesSelect Start All Programs Norton AntiVirus Norton AntiVirus Recovering Computer When the computer is not operating properly Restoring the System Creating a Restore PointSelect ‘Create a restore point’, and than click Next Undoing the last restoration Returning your computer to an earlier restore pointProcedures to undo a restoration are described below Reinstalling Software Running the system software media Installing drivers and programs Re-Installing Windows When using a partitioned hard disk drive Recovering the Computer When Start Microsoft Windows appears, click the Next button If the System Software Media consists of 2 CDs Q2The system freezes during program operation Windows RelatedQ1The system does not shutdown properly Adjust the LCD screen brightness. Use the Fn + , Fn + keys Display RelatedQ1The LCD screen is blank Q6 I pressed Fn+ keys, then the screen blinks Q8 Fn+ keys do not operate Q2 I cannot make a call using an extension line This case, complete the following proceduresModem Related Q1 I cannot hear the modem sound Dialing Rules tab, click Edit Using an AT commandQ3 How do I use my modem when dialing from overseas? Wired LAN Related Q1 Wake On LAN Function Wireless LAN Related Q3 I cannot share an Internet connection Q4 I cannot connect to the AP Check the Computer SettingsCheck the AP Settings A6 Check the network key settings encryption key 18Manual Page 20Manual Q6 The running speed of a game is too slow or fast Change the setting of Power Schemes to Always OnGame/Program Related 22Manual Security Center 24Manual Page 26Manual Appendix System Specifications Specification Comment Wireless LAN Specifications Optional IntelR PRO/Wireless 2200BG Network ConnectionRF Specifications Specifications IntelR PRO/Wireless LAN 2915ABG Network Connection Copyright Registered Trademarks Safety Instructions Instructions for Setup There is a danger of electric shocks Cases when the hard disk and data may be damagedInstructions for careful handling Use authorized service centers as the system may be damaged