Step 2. Configure digital sound output on the computer

1.Click Start > Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio Devices.

2.In the Device volume field on the Volume tab, click Advanced.

3.In the [Master Volume] dialog, click Option > Advanced Controls. Then Advanced button is displayed on the bottom of the dialog.

4.Click Advanced, select “1 PCM SPDIF”, then click Close.

Step 3. Enable S/PDIF on the DVD program

When using 5.1 channel speakers, you need to install the Power DVD program from the DVD Installation CD separately supplied

and then change the settings as directed in these steps:

1.Run Power DVD and click the Settings button.

2.On the Audio tab, set the Output setting to ‘Use SPDIF Output’.

Now, you can enjoy home theater using DVD titles.

Caution To control volumes for your 5.1 channel speaker, use the control on the digital amp. (Please, refer to the speaker manual.)

3-8Manual

Page 35
Image 35
Samsung Q30 manual Configure digital sound output on the computer, Enable S/PDIF on the DVD program