Samsung Q35 manual Wired LAN Related, Q1 Wake On LAN Function, To use Wake On LAN function

Wired LAN Related

Q1 <Wake On LAN> Function.

A<Wake On LAN> is a function that activates the system in rest mode when a sig- nal (such as ping or magic packet commands) arrives from network(wired LAN).

To use <Wake On LAN> function

1.Select My Network Environment > View Network Connections from the Desktop.

2.Click the right button on the touchpad over Local Area Connection, and select Properties.

3.Click Configure..., and select Power Management tab. Select 'Allow this device to bring the computer out of standby', then click OK. Restart the system.

If the system in rest mode is activated when there is no received signal, use the system after disabling <Wake On LAN> function.

If you turn the power off when <Wake On LAN> is disabled, the LAN LED con- tinues to be lit up.

Connecting wired LAN while using wireless LAN may not execute <Wake On LAN> function. Configure wireless LAN to 'Disable' to use <Wake On LAN> function.

1.Click on My Network Place> View network connections on the Desktop.

2.Right-click over Wireless Network Connection and select Disable.

Q2 When I connected 100Mbps wired LAN and the computer exits standby/hibernate mode, a message informing 10Mbps wired LAN connection appears.

AWhen the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates in 100Mbps.

Chapter 7. Recovering the Computer 7-17