Samsung Q35 manual Sharing Internet Access, Using the network after moving location

Using the network after moving location

By setting the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network without performing the network setting procedures regardless of your location.

1.Run Samsung Network Manager when connected to the Internet.

2.Select an icon that represents the corresponding location from the Saved Locations window and then click Move.

3.When the network settings of the selected location are applied, the new location and the network connection information are displayed in the The detailed Information for window.

Sharing Internet Access

This section describes the procedures to share Internet Access.

To share Internet Access, you first have to define a sharing server and a sharing client. When the setup is complete, you can access the Internet from the sharing client by connecting to the sharing server.

Note	Sharing Server : A computer with 2 LAN interfaces that provide a function to
			share Internet Access.
	Sharing Client	: A computer that uses the Internet by
		connecting to a sharing server without itself having a direct
		connection to the Internet.
	You can connect a sharing server and a sharing client as follows. (See Figure 5
	on page 4-15.)
			Sharing Server
			External Internet	Client Device	Sharing Client
			Device
	Connection 1		Wired LAN	Wireless LAN	Connect a sharing client
					with the device that is the
	Connection 2		Wireless LAN	Wired LAN
					same as the client device
	Connection 3		Wired LAN	Wired LAN	of the sharing server.

For Connection 3, you have to connect a LAN card in advance.

To connect a sharing server and a sharing client using a wired LAN, connect the computers with a crossover LAN cable or network hub first.

To use a wireless LAN, press the <Fn> and < > key combination simultane- ously to enable a wireless LAN.

When the wireless LAN is turned on, the Wireless LAN Operation LED

( ) lights up.

As an example, Internet sharing procedures for [Connection 1], which connect the sharing server and the Internet through a wired LAN and connect the sharing server and the sharing client through a wireless LAN, are described below.

Chapter 4. Connecting to the Internet 4-17