4.Lift the door straight up to remove.
5.Remove the screw ( 8 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 9 ) attached to the lower left and right door hinges with an allen wrench. Remove the lower left and right door hinges ( 10 ).
DISASSEMBLE THE FLEX DOOR
1.Take out the upper drawer by lifting it up.
2.Take out the lower basket ( 1 ) by lifting the basket up from the rail system. 
1
01 SETTING UP
10
8
9 
Allen wrench
3. Press the fi xing hook of rail system.
REATTACHING THE REFRIGERATOR DOORS
To reattach the fridge doors after you have moved the fridge to its fi nal location, assemble parts in reverse order.
1.The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser.
2.Insert the clip in the install pack and check that it holds the line fi rmly.
Center of transparent
coupler
clip A (6.35 mm)
4.After holding and pulling out the top of Freezer Door, remove it at the rail system.
Make sure there is no scratch at the end of CAUTION Sliding Rail by being dented from the fl oor.
setting up _11
2012.7.11 8:16:17 PM |
