Samsung RF263BEAESP/ML Reverse Osmosis Water Supply, Turn on the main water, Runs clear approx to

Removing any residual matter inside the water supply line after installing the water filter.

1.Turn ON the main water

supply and supply water from water supply line.

2. Run water through the dispenser until the water

runs clear (approx. 6 to

7 minutes). This will clean the water supply system and remove air from the lines.

3.Additional fl ushing may be required in some households.

4.Open the Refrigerator door and make sure there are no water leaks coming from the water fi lter.

Be sure to fl ush the dispenser thoroughly, otherwise water may drip from the dispenser.

This means that there is still air in the line.

Reverse Osmosis Water Supply

IMPORTANT:

The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 241 and 827 kPa.

If a reverse osmosis water fi ltration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 276 to 414 kPa. If the water pressure to the reverse osmosis system is less than 276 to 414 kPa:

•Check to see whether the sediment fi lter in the reverse osmosis system is blocked. Replace the fi lter if necessary.

•Allow the storage tank on the reverse osmosis system to refi ll after heavy usage.

•If your refrigerator has a water fi lter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system.

Remove the water fi lter.

If you have questions about your water pressure, call a licensed, qualifi ed plumber.

CONTROLLING THE TEMPERATURE

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and recommended temperatures of the Freezer and Refrigerator Compartments are 0 °F and 37 °F(or -18 °C and 3 °C) respectively. If the temperature of the Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer
temperature	02
	OPERATING

Recommend Temp (Freezer) : 0 °F (or -18 °C )

The Freezer temperature can be set between -8 °F and 5 °F (or between -23 °C and -15 °C) to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1 °F (or 1 °C) with each press. See below.

Fahrenheit : 0 °F ➞ -1 °F ➞ -2 °F ➞ -3 °F ➞ -4 °F

➞-5 °F ➞ -6 °F ➞ -7 °F ➞ -8 °F ➞ 5 °F ➞ 4 °F

➞3 °F ➞ 2 °F ➞ 1 °F ➞ 0 °F.

Centigrade : -18 °C ➞ -19 °C ➞ -20 °C ➞ -21 °C

➞-22 °C ➞ -23 °C ➞ -15 °C ➞ -16 °C ➞ -17 °C

➞-18 °C.

Keep in mind that foods like ice cream may melt at 4 °F (or -15.5 °C). The temperature display will move sequentially from -8 °F to 5 °F (or from -23 °C to -15 °C).

Controlling the fridge temperature

The fridge temperature can be set between 34 °F and 44 °F (or between 7 °C and 1 °C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1 °F (or 1 °C) with each press. See below.

Fahrenheit : 37 °F ➞ 36 °F ➞ 35 °F ➞ 34 °F ➞

44 °F ➞ 43 °F ➞ 42 °F ➞ 41 °F ➞ 40 °F ➞ 39 °F

➞38 °F ➞ 37 °F.

Centigrade : 3 °C ➞ 2 °C ➞ 1 °C ➞ 7 °C ➞ 6 °C

➞5 °C ➞ 4 °C ➞ 3 °C.

The temperature control process for the Fridge works just like the Freezer process. Press the

operating _17

DA68-02615D(0.0).indb 17 2012.7.11 8:16:32 PM