SEVERE WARNING SIGNS WARNING FOR INSTALLATION
•Do not install this appliance near a heater, infl ammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
Do not install this appliance in a location where gas may leak.
-This may result in an electric shock or fi re.
•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliances.
•Do not plug several appliances into the same multiple power board.
The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matched the rating plate.
-This provides the best performance and also prevents overloading house wiring circuits, which could cause a fi re hazard from overheated wires. If the wall socket is loose, do not insert the power plug.
-There is a risk of electric shock or fi re.
•Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•Do not bend the power cord excessively or place heavy articles on it.
•Do not use aerosols near the refrigerator.
-Aerosols used near the refrigerator may cause an explosion or fi re.
•The installation or any service of this appliance is recommended by a qualifi ed technician or service company.
-Failing to do so may result in an electric shock,
fire, explosion, problems with the product, or injury.
•This refrigerator must be properly installed and located in accordance with the manual before it is used.
•Connect the power plug in proper position with the cord hanging down.
-If you connect the power plug upside down, wire can get cut off and a cause fi re or an electric shock.
•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
•When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fi re hazard.
•The appliance must be positioned so that the plug is accessible after installation.
• This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
-You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator.
-This may result in an electric shock, fi re, explosion, or problems with the product.
-Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.
•Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
-When moving the refrigerator, be careful not to roll over or damage the power cord.
-This may result in an electric shock or fi re.
•This appliance should be positioned in such a way that it is accessible to the power plug.
-Failing to do so may result in an electric shock or fi re due to electric leakage.
•Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
-This may result in an electric shock, fi re, problems with the product, or injury.
•Never use gas pipes, telephone lines or other potential lightening rods as ground.
-Improper use of the ground plug can result in an electric shock.
•If the power cord is damaged,
have it replaced immediately by the manufacturer or its service agent.
•The fuse on the refrigerator must be changed by a qualifi ed technician or service company.
-Failing to do so may result in an electric shock or personal injury.
Safety information _03
2012.7.11 8:16:10 PM |
