( 8 ) Filter Water filter usage
This icon will light up when you need to change the fi lter. After you use about 300 gallons of water, the fi lter indicator lights up. (about 6 months). After you install the new water fi lter, reset the fi lter indicator by touching the Alarm/hold 3 sec for Filter Reset button.
• If water is not dispensing or dispensing slowly, you need to replace the water fi lter because the water fi lter is clogged.
•Some areas have large amounts of lime in their water, which causes the water fi lter to clog more quickly.
CHANGING THE WATER FILTER
To reduce risk of water damage to your WARNING property DO NOT use generic brands
of water fi lters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water fi lter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water | ||
Filter. |
| |
The Filter light turns red to let you |
| |
know when it is time to change your |
| |
water fi lter cartridge. |
| |
To give you time to get a new fi lter, |
| |
the red light comes on just before the | (Red) | |
capacity of the current fi lter runs out. | ||
| ||
Changing the fi lter on time provides you with the freshest, cleanest water from your refrigerator.
1.Shut off the water supply. Then, turn the water fi lter ( 1 ) about 1/4 turn,
2.Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).
2
1
• To change the water fi lter more easily, shut off the water supply valve.
•Sometimes, it is hard to disassemble the water fi lter because impurities in the water cause it to stick. If you are having diffi culties, grip the water fi lter fi rmly and pull it hard.
16_ operating
• When you pull the |
|
water fi lter, a little | 2 |
water can leak from |
|
the opening. This is | 3 |
normal. To minimize |
|
the water leaks, keep the fi lter cartridge |
|
horizontal when you pull it. |
|
•To prevent overfl ow, empty the water fi lter tray ( 3 ) and dry around the fi lter case ( 2 ).
3.Insert the new fi lter into the fi lter case ( 4 ).
4.Push the fi lter, and then turn it clockwise until it
locks.
• If you have trouble inserting the water fi lter because of high water pressure, shut off the water supply valve.
• The locked symbol should be lined up with the indicator line.
4
5.Touch the “Ice Type/Water
Hold 3 sec for Filter Reset”
button ((Filter Reset)) for
about 3 seconds to reset the water fi lter. The color of
indicator ( 
) changes from red to off.
6.If you turned off the water supply, turn it back on.
For a replacement water fi lter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water fi lter has the SAMSUNG logo on the box and
on the water fi lter. Link : http://www. samsungparts.com
2012.7.11 8:16:30 PM |
