precautions Safety

Safety precautions

Serious warning signs relevant to assembly

Warning

• Please do not assemble this equipment in a damp location full of oil or dust or under exposure of direct sunshine and water leakage (leakage of rain).

-Damage of the insulated wrapper of the electric parts may cause electric

shock or fire disaster.

•Please do not expose the refrigerator under direct sunshine or the heat source of the furnace, indoor radiator or other equipment.

•Please do not connect more than one device to the same power panel with several sockets. The refrigerator shall always be connected to the

independent power socket corresponding with the rated voltage of the nameplate.

-In this case, the best performance may be provided and overload of the indoor wired circuit may be prevented for fear of causing fire disaster by the overheated line. Please do not plug the power plug in if the socket is loose.

-Otherwise, electric shock or fire disaster may be caused.

•Please do not use the power line broken or worn in the middle or end.

•Please do not bend the power line or place weights on it.

•Please do not use smoke agent near the refrigerator.

-Using smoke agent near the refrigerator may cause explosion or fire disaster.

• Please do not install this equipment in the place where gas leakage may occur.

-This may cause electric shock or fire disaster.

•When positioning the appliance, ensure the supply cord is not trapped or damaged.

•Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

6 English