Level the refrigerator and adjust the height of the door
Tools you may need (unprovided)
Cross screwdriver (+) | Flat head screwdriver | Ring wrench (10 mm) |
Pincer | Allen wrench (4 mm) | Allen wrench (5 mm) |
Warning
•Prior to leveling the refrigerator and adjusting the height of the door, please plug the power plug out.
How to level the refrigerator
If the refrigerator is not placed level, a height difference between the refrigerator
doors may produce.
• Insert the flat head screwdriver (-) into the groove of the horizontally
adjusted stand bar control rod, then
rotate the control rod clockwise or anticlockwise so as to level the
refrigerator. Rotate the control rood
clockwise to lower the refrigerator. Rotate the control rood anticlockwise to raise the refrigerator.
Note
•If the front and back position of the refrigerator is not level, please put a solid subplate under the stand bar behind the support (such as plastic plate and plastic ruler), and then fix it with plastic cement. When pushing the refrigerator to the installation position, please be sure that the back stand bars are on the subplate.
•If you use wooden floor or similar soft floor, please be careful not to damage the floor when pushing the refrigerator.
Assembly
English 19