Installation
How to adjust the height of the refrigerator door
If any door is lower than the other, you may adjust them as follows:
•Prior to adjustment, please check whether the refrigerator has been leveled.
Assembly
①
②
Caution
Method (I) as shown in the figure: Insert the snap ring 1 between the door and the hinge with a pincer to adjust the height difference of the refrigerator doors.
After checking the height difference, please select a snap ring
which has a proper thickness. Important information: You may only insert one snap ring. Insertion of two or more snap rings may cause the snap ring to slide or produce abrasion sound. Lift the lower door upward and insert the snap ring into the gas between the door and the hinge.
Method (II) as shown in the figure (applied to RF50K58** Series): Insert the allen wrench 2 of 4 mm into the hold at the lower part of the hinge, and then rotate the wrench clockwise (to lower the door) or anticlockwise (to raise the door).
Important information:
•Prior to rotating the wrench, please take the articles on the bottle shelf of the door out, then the wrench will be easily turned.
•To avoid personal injury, please be careful to insert or extract the snap ring.
•Please keep the snap ring and wrench out of reach of children to ensure that the children will not play with them or put them in the mouth.
20 English