check the water level
Test button

USING THE COLD WATER DISPENSER

Press the Ice / Water button to select the type of you want.

NO ICE Select this if you want to turn ice maker off

Using the ice lever ( 1 )

Push the Ice lever dispenser ( 1 ) gently with your glass. Ice will be released from the dispenser.

You can choose the type of ice by pushing the cubed or crushed button fi rst.

Using the Water lever ( 2 )

Push the Water lever

 

dispenser ( 2 ) gently with your

 

glass. Water will be released

1

from the dispenser.

 

Even if you push the water

2

and Ice lever simultaneously, the dispenser operates only the option you selected or pushed fi rst.

Using the Ice & Water Dispenser together

To get Ice and water, push the Ice lever ( 1 ) fi rst for ice, then move your glass glass down and press the water dispenser lever ( 2 ) for water.

Do not pull the CAUTION lever out. You could

damage or break the lever’s spring.

To clean the CAUTION ice bin/bucket,

wash with a mild detergent, rinse well, and dry

thoroughly it. Do not use harsh or

abrasive cleaners or solvents.

When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced.

In case ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker.

Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket.

Normal Use

To fi ll the ice bucket to maximum capacity after installation, follow these steps:

1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

- Waiting 24 hours will allow your ice maker to cool properly.

2.Dispense 4 to 6 ice cubes into the glass.

3.After 8, and then 16 hours, dispense a full glass of ice.

When you press the Test button, you will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.

The chime sounds automatically again to let you know the ice maker is working well.

If a power failure occurs, ice cubes may melt CAUTION then freeze together when the power comes back on, causing the dispenser to be out of order. To prevent this problem, after a power failure, pull out the ice bucket and discard the

residual ice or water.

After you dump the ice from the ice bucket, CAUTION you should press the dispenser lever once

with the ‘ICE CUBED’ or ‘CRUSHED’ function ON. The ice maker will make new ice faster after you return the ice bucket in the refrigerator.

If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page. However, only wait 8 hours before dispensing the fi rst 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.

operating _15

02 OPERATING

DA99-03404D-11.indb 15

2015. 5. 7. ￿￿ 8:10

Page 15
Image 15
Samsung RFG28MERS1/HAC manual Using the Cold Water Dispenser, Using the ice lever, Using the Water lever