Samsung RFG28MERS1/HAC manual Basic temperature of Freezer and Refrigerator Compartments, Ice Off

(6)If you don’t want to make more ice, press

Ice Off	the Ice Off button. Pressing this button
(Hold 3 sec	3 second locks the display panel and
for Child lock)
	dispenser buttons so the buttons can not
	be used.The Child Lock icon lights up to
	indicate you’ve activated the Child Lock
	function.

USING THE CONTROL PANEL

Basic temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -19°C and 3°C respectively.

(7)

Cubed Ice

(8)

Crushed

Ice

(Cubed) (Crushed)

Press the Cubed Ice or Crushed Ice button to select the type of ice you want dispensed. Each time you press the button, the cubed and crushed ice modes alternate and the Cubed or Crushed ice icon lights up, indicating your selection.

If you don’t need ice, turn the function off to save on water and energy consumption (See Ice Off below).

If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between -14ºC and -22ºC to suit your particular needs. Press

the Freezer button repeatedly until the desired

( 9 )	If you don’t want to make more ice, press
	the Ice Off button.
Ice Off
	The icon will light up and the Ice-Maker
	stops making ice.
	We recommend you stop ice making if the
	following occur:
	- There is enough ice in the ice bucket.
	- You want to save water and energy.
	- Water is not being supplied to the
	refrigerator.
	If the ice maker function is ON, and
	the water line is not connected,
	there will be a	water valve noise
	from back of the unit. Press the
	Ice Off(6) button until the Ice Off
	indicator (	) illuminates.

( 10 )		Water filter usage
Filter	1.		Normally the filter indicator is blue,
			yellow, or green when you purchase or
			install your refrigerator, depending on
			your model.
(Red)	2.		After you use about 1020 L of water,
(Reset the			the filter indicator turns Light Pink.
indicator)			(about 5 months)

3.After you use about 1135 L of water, the filter indicator turns Red. (about

6 months) The icon will blink red for several seconds when you open or close the door.

4.Remove the old water filter and install a new one when the filter indicator is red. Reset the filter indicator by pressing Alam/Hold 3 sec for Filter Reset button for 3sec.

• If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.

•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.

14_ operating

temperature is shown in the temperature display. The temperature will move 1°C degrees with each press (-19°C → -20°C → -21°C → -22°C → -14°C → -15°C → -16°C → -17°C → -18°C → -19°C). Keep in mind that foods like ice cream may melt at 0°C. The temperature display will move sequentially from -22°C to -14°C.

Controlling the Refrigerator temperature

The Refrigerator temperature can be set between 7ºC and 1ºC to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display.

The temperature will move 1°C degrees with each press (3°C → 2°C → 1°C → 7°C → 6°C → 5°C → 4°C

→3°C). The temperature control process for the Fridge works just like the Freezer process.

Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be refl ected in the digital display.

- The temperature of the Freezer, fridge or Convertible Room may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.

-This may cause the digital display to blink. Once the Freezer and fridge temperature return to their normal set temperatures, the blinking will stop.

-If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.

-If there is an communication error between the Display and Main Controller, the Convertible Display light may blink. Once the normal set temperatures are reached, the blinking will stop. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.

DA99-03404D-11.indb 14 2015. 5. 7. ￿￿ 8:10