Samsung RFG28MERS1/HAC manual Operating your samsung refrigerator, Using the Control Panel

Operating your samsung refrigerator

USING THE CONTROL PANEL

( 3 )

Alarm /

hold 3

sec for

The Alarm/Hold 3 sec for Filter Reset button serves two purposes:

-To turn the door open alarm on and off

-To reset the water fi lter life indicator.

02

1

2

3

10

4

5

6

9

78

Filter

Reset

(Filter Reset)

1)Door Alarm Function

If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes.

The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then releasing the Alarm/ Hold button. You can turn it back on in the same fashion. The icon lights up when the function is on.

OPERATING

(1 ) Press the Energy Saver button for better

Energy	energy effi ciency.
Saver	The Energy Saver icon lights up when you
	press the Energy Saver button.
	The Energy Saver function is automatically
	set to “ON” when power is supplied to the
	refrigerator.
	If condensation or water drops appear on
	the doors, turn the Energy Saver mode off.

(2 ) The Power Freeze function substantially

Power	speeds up the freezer compressor,
Freeze	causing the freezer to cool down rapidly
	to a temperature you choose. When you
	press the Power Freeze button, the Power
	Freeze icon lights up.
	Power Freeze is useful if you need to quick
	freeze an item, to make a large quantity of
	ice, or to cool the freezer rapidly if it has
	warmed dramatically (for example, if the
	door was left open).
	To turn off Power Freeze, press the Power
	Freeze button again. Power Freeze turns
	off automatically after 72hours to decrease
	energy consumption.
	When you use this function the energy
	consumption of the refrigerator will
	increase. Remember to turn it off when you
	don’t need it and return the freezer to your
	original temperature setting. If you need to
	freeze large amount of food stuff, activate
	Power Freeze function at least 24 hours
	before.

2)Water Filter Life Indicator Function

After you replace the water fi lter, press and hold the Alarm/Hold 3 sec for Filter Reset button to re-set the water fi lter life indicator. The Filter icon will turn red to let you know it is time to change the water fi lter after six months (about 1135 L).

Some areas have large amounts of lime in their water, which causes the water fi lter to clog more quickly. If this is the case in your area, you will have to change the fi lter more frequently than every six months.

( 4 )	Pressing the Lighting button turns on the
	Dispenser LED lamp (under the display)
Lighting
	in continuous mode so that it stays on
	continuously. The button also lights up. If you
	want the Dispenser lamp to come on only
	when some one uses the dispenser, press the
	Lighting button to turn the continuous mode off.

(5 ) The Power Cool function substantially

Power	speeds up the refrigerator compressor,
Cool	causing the refrigerator to cool down
	rapidly to a temperature you choose. When
	you press the Power Cool button, the
	Power Cool icon lights up.
	Power Cool is useful if you need to quickly
	cool items or need to cool the refrigerator
	rapidly if it has warmed dramatically (for
	example, if the door was left open).
	To turn off Power Cool, press the Power
	Cool button again. Power Cool turns off
	automatically after 2 1/2 hours to decrease
	energy consumption.
	When you turn on Power Cool, the
	refrigerator’s compressor speeds
	up and is louder than during normal
	operation.

operating _13

DA99-03404D-11.indb 13 2015. 5. 7. ￿￿ 8:10