REMOVING THE
REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.
Disconnect power to the refrigerator before WARNING removing the door or drawer.
• Be careful not to drop, damage or scratch the door/drawer while removing them.
•Be careful not to get injured while removing the door/drawer.
•Reattach the door/drawer properly to avoid:
-Moisture from air leakage.
-Uneven door alignment.
-Wasting energy due to improper door seal.
Tools you will need (Not provided)
Philips | Socket wrench | |
screwdriver (+) | screwdriver | (10 mm) |
Pliers | Allen wrench |
|
| (3/16”) (5 mm) |
|
2.Disconnect two connectors ( 3 ) at each side of the top cap and the one connector ( 4 ) on left side door. Remove the tube ( 5 ) with pressing the dark gray color part ( 6 ) of the water line coupler.
4
3 
5 
6
3.Remove the 3 hex head bolts ( 7 ) attached to the upper left and right door hinges with a socket wrench (10mm). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver(+). Remove the upper left and right door hinges ( 9 ).
Socket wrench
7 
8
9
4.Lift the door straight up to remove.
Disassemble the Refrigerator doors
1.With the door opened, remove the Hinge Cover cap ( 1 ) with a Flat head screwdriver, and close the door. Remove the 3 screws holding down the Hinge Cover and remove the Hinge Cover ( 2 ) .
5.Remove the screw ( 10 ) attached to the lower left and right door hinges with a philips screwdriver(+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges ( 12 ).
2 | 12 |
10
11
1 | Allen wrench |
08_ setting up
2015. 5. 7. 8:10 |
