Samsung RFG28MERS1/HAC manual Disassemble the Flex Door, Assemble the Flex Door, Type a Type B

REATTACHING THE REFRIGERATOR DOORS

To reattach the fridge doors, assemble parts in reverse order.

1.The Water Line must be fully inserted to the center of transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.

Type A	Type B
	Dispenser
Center of Transparent coupler	The Guide Lines

When reassembling it, be sure to connect the CAUTION wire harness.

If it is not connected, the Flex Room does not work.

4.Remove 2 hex head bolts from sides with a socket wrench (10 mm)

5.Lift up the Flex door from the rails.

01 SETTING UP

DISASSEMBLE THE FLEX DOOR

1.Take out the Flex Zone ( 1 ) by lifting it up.

1

2.Take off the cover ( 2 ) w/harness with a flat- blade screwdriver (-).

Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing

completely and can cause frost build-up.

2

3.Press the locking tab and separate the Wire Connector.

ASSEMBLE THE FLEX DOOR

To reattach the fl ex door,assemble parts in reverse order.

Be sure to connect the Flex Door Wire CAUTION Connector.

If it is not connected, the Flex Room does not work.

setting up _09

DA99-03404D-11.indb 09 2015. 5. 7. ￿￿ 8:10