Basic position
Position reversed
10.Remove the Cap Handle and the Screws by
(1)(2)
12.Switch the position of cap screw and cap. Pull out using a thin flat screwdriver.
(1) | (3) |
| (2) |
Remove the Cap by
If the handle is not installed, skip steps 10 and 11 because they are not applicable. Availability of these steps depends on the model.
Be careful the Scratch, when
CAUTION disassembling the Cap.
11. Assemble the Cap.
Be careful not to injure yourself during CAUTION operation.
13.Lay the refrigerator carefully on it’s back. Remove the leg (unscrew in an
Hinge Low
Leg
To protect the refrigerator damage, cut a large section of the cardboard carton and place it under the refrigerator.
14.Assemble the Middle hinge using the Phillips Head (+) screwdriver. (Assemble Washer upwardly before assembling Middle hinge.)
Washer (optional)
28_ operating
2018. 1. 31. |
�� 9:55