![](/images/new-backgrounds/1154951/15495117x1.webp)
Setting up Your Monitor
Table 1. Connector locations for multimedia bases (Continued )
Item | Name | Description | |
|
|
| |
D | MIC OUT jack | Connect a cable here to send sound from the | |
internal microphone to the computer’s sound | |||
|
| card. | |
|
|
| |
E | AUDIO IN jack | Connect a cable here to bring sound from your | |
computer’s sound card. | |||
|
| ||
|
|
| |
F | External | Connect an external microphone here. Using an | |
external microphone automatically disconnects | |||
microphone jack | |||
| the monitor’s internal microphone. | ||
|
| ||
|
|
| |
G | Headphone jack | Connect headphones here. Connecting | |
headphones automatically turns the speakers off. | |||
|
| ||
|
|
|
Français English
Plug and Play
Our adoption of the new VESA®Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the flat panel display. If your PC system needs a video driver, follow the instructions given below according to the operating system your computer uses.
Installing the Video Driver
Accompanied CD has necessary drivers for installing your monitor. For the driver installation, please refer to the driver installation instructions included with CD.
7
Portuguese Italiano Español Deutsch