LEVELING REFRIGERATOR
About Leveling first.
NOTE
Making small adjustments between doors.
If the door of the freezer is lower than that of the | If the door of freezer is higher than that of the |
refrigerator. | refrigerator. |
Adjustment part | Adjustment part |
Please open the doors and adjust then as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly NOTE counterclockwise direction. This will enable you to turn the nut(①) loose with your fingers.
➂ WRENCH | ➂ WRENCH |
|
➀ NUT |
| ➀ NUT | |
➁ BOLT | ➁ BOLT | ||
| |||
|
|
2)Please adjust the height difference between the doors by turning the bolt (➁) clockwise ( 
) or counter
clockwise ( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➂ WRENCH | ➂ WRENCH |
|
➁ BOLT | ➁ BOLT |
3)After adjusting the doors, the nut (①) turn clockwise ( 
) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH | ➂ WRENCH |
➀ NUT |
| ➀ NUT |
| ➁ BOLT | |
| ➁ BOLT | |
| If you do not fix the nut (①)firmly, the bolt (➁) may be released. |
|
NOTE | 25 |
|
|
|
INSTALLATION INSTRUCTIONS
