Adjusting the balance/FOCUS | Sennheiser EK3253 manual

Adjusting the balance/FOCUS

During stereo operation – and provided that the standard display is shown – the / rocker button serves to adjust the balance between the left and right stereo signal.

During FOCUS operation, the / rocker button serves to adjust the relative levels of the two separate channels in the mixed mono signal (see “Stereo/FOCUS selection – ST-FOC” on page 27).

Activating/deactivating the lock mode

The receiver has a lock mode that can be activated or deactivated via the operating menu (see “Activating/ deactivating the lock mode – LOCK” on page 29).

Attaching the receiver to clothing

The receiver is attached to clothing (e.g. belt, waistband) with the supplied belt clip.

The clip is detachable so that you can also attach the receiver with the antenna pointing downwards. To do so, withdraw the clip from its fixing points and attach it the other way round.

17

Image 15

Sennheiser EK3253 Adjusting the balance/FOCUS, Activating/deactivating the lock mode, Attaching the receiver to clothing

Contents

Instructions for use Contents Thank you for choosing Sennheiser Health risks arising from use Safety instructions Delivery includes Intended use of the receiverImproper use EK 3253 bodypack receiver Channel bank systemRecommended transmitters UP/DOWN Operating controls Operation and battery status indication Indications and displaysLC display Mute display Modulation display of the received transmitter RF signal indication Pilot displayDisplay backlighting Inserting and replacing the batteries Preparing the receiver for use Inserting and charging the accupack Using the receiver Switching the receiver on/offConnecting the headphones Adjusting the volume Adjusting the balance/FOCUS Activating/deactivating the lock modeAttaching the receiver to clothing Buttons Operating menu Overview of menus Working with the operating menu Getting into the operating menuSelecting a menu Adjusting a setting Storing a settingExiting the operating menu Exit Operating menu of the receiver Chan Selecting a channel Chan Adjustment tips for the operating menu Releasing locked channels Adjusting the squelch threshold SqelchScanning the channel bank for free channels Starting the scan and storing the scan result Important note HI-BST Stereo/FOCUS selection ST-FOC Entering a name Name Selecting the standard display Dislpy Loading the factory-preset default settings Activating/deactivating the lock mode LockActivating/deactivating the pilot tone evaluation Pilot Exiting the operating menu Exit Error checklist If problems occur For optimum reception Maintenance and careRecommendations and tips For the receiver Additional information Squelch Pilot tone squelchField strength-dependent squelch EK 3253 bodypack receiver Specifications Accessories Connector assignment Warranty regulations